logo

DETAILS

Check category

Thermal expansion and contraction of the bridge

  • Categories:Zhongrui News
  • Author:
  • Origin:
  • Time of issue:2019-05-28 14:27
  • Views:

(Summary description)Any object has thermal expansion and contraction, but sometimes it does not change much. We can't see it. The bridge is the same. Due to the change of ambient temperature, the steel cable tray will show thermal expansion and contraction. The outdoor bridge is affected by temperature. For example, the maximum ambient temperature is 40 °C and the lowest temperature is -20 °C. The maximum shrinkage of the cable tray is obtained by the following formula: Δt=11.2 ×10-6×60deg (degrees)×1000mm This concludes that when the temperature difference is 60 °C, Δι =0.672 mm/m, the temperature difference is 50 °C, Δι = 0.560 mm/m, the temperature difference is 40 °C, Δι =0.448 mm/m, the straight line cable tray should be considered in engineering design. For the expansion joints, the spacing of the expansion joints is recommended as follows: 50m when the temperature difference is 40°C; 40m when the temperature difference is 50°C; 40m when the temperature difference is 60°C.

Thermal expansion and contraction of the bridge

(Summary description)Any object has thermal expansion and contraction, but sometimes it does not change much. We can't see it. The bridge is the same. Due to the change of ambient temperature, the steel cable tray will show thermal expansion and contraction. The outdoor bridge is affected by temperature. For example, the maximum ambient temperature is 40 °C and the lowest temperature is -20 °C. The maximum shrinkage of the cable tray is obtained by the following formula: Δt=11.2 ×10-6×60deg (degrees)×1000mm This concludes that when the temperature difference is 60 °C, Δι =0.672 mm/m, the temperature difference is 50 °C, Δι = 0.560 mm/m, the temperature difference is 40 °C, Δι =0.448 mm/m, the straight line cable tray should be considered in engineering design. For the expansion joints, the spacing of the expansion joints is recommended as follows: 50m when the temperature difference is 40°C; 40m when the temperature difference is 50°C; 40m when the temperature difference is 60°C.

  • Categories:Zhongrui News
  • Author:
  • Origin:
  • Time of issue:2019-05-28 14:27
  • Views:
Information

Any object has thermal expansion and contraction, but sometimes it does not change much. We can't see it. The bridge is the same. Due to the change of ambient temperature, the steel cable tray will show thermal expansion and contraction. The outdoor bridge is affected by temperature. For example, the maximum ambient temperature is 40 °C and the lowest temperature is -20 °C. The maximum shrinkage of the cable tray is obtained by the following formula: Δt=11.2 ×10-6×60deg (degrees)×1000mm This concludes that when the temperature difference is 60 °C, Δι =0.672 mm/m, the temperature difference is 50 °C, Δι = 0.560 mm/m, the temperature difference is 40 °C, Δι =0.448 mm/m, the straight line cable tray should be considered in engineering design. For the expansion joints, the spacing of the expansion joints is recommended as follows: 50m when the temperature difference is 40°C; 40m when the temperature difference is 50°C; 40m when the temperature difference is 60°C.

Scan the QR code to read on your phone

ABOUT US

 

 

Introduction

 

Business

 

Win-win

 

Advantage

 

Contact us

NEWS

 

 

Zhongrui News

 

Industry

 

FAQ

 

Support

 

CONTACT US

Add:92 Weier Road, Chengbei Park, Jingjiang Economic and Technological Development Zone, Jiangsu Province 

Phone

Mobile version