logo

DETAILS

Check category

How to install the cable tray type crane

  • Categories:Zhongrui News
  • Author:
  • Origin:
  • Time of issue:2019-05-28 14:26
  • Views:

(Summary description)The energy spreader is generally used in steel structures, such as I-beam, angle steel, light steel keel, etc. The spreader, clamp, boom, and hoist can be assembled into a whole in advance, at the fixed point marked. Lifting, crimping the lifting fixture to the steel structure one by one, and tightening the top wire. 1 When assembling the straight section of the cable tray, the trunk line should be made first, then the branch line should be made, and the hoisting device and the cable tray should be fixed together with the butterfly clamp. According to this method, the cable tray is assembled piece by piece. 2 Cable trays and cable trays can be fastened with internal or external connectors, with flat washers and spring washers with nuts. 3 Turning parts should be used with vertical elbows and vertical elbows. The installation angle of cable trays should be appropriate.

How to install the cable tray type crane

(Summary description)The energy spreader is generally used in steel structures, such as I-beam, angle steel, light steel keel, etc. The spreader, clamp, boom, and hoist can be assembled into a whole in advance, at the fixed point marked. Lifting, crimping the lifting fixture to the steel structure one by one, and tightening the top wire.

1 When assembling the straight section of the cable tray, the trunk line should be made first, then the branch line should be made, and the hoisting device and the cable tray should be fixed together with the butterfly clamp. According to this method, the cable tray is assembled piece by piece.

2 Cable trays and cable trays can be fastened with internal or external connectors, with flat washers and spring washers with nuts.

3 Turning parts should be used with vertical elbows and vertical elbows. The installation angle of cable trays should be appropriate.

  • Categories:Zhongrui News
  • Author:
  • Origin:
  • Time of issue:2019-05-28 14:26
  • Views:
Information
The energy spreader is generally used in steel structures, such as I-beam, angle steel, light steel keel, etc. The spreader, clamp, boom, and hoist can be assembled into a whole in advance, at the fixed point marked. Lifting, crimping the lifting fixture to the steel structure one by one, and tightening the top wire.
 
1 When assembling the straight section of the cable tray, the trunk line should be made first, then the branch line should be made, and the hoisting device and the cable tray should be fixed together with the butterfly clamp. According to this method, the cable tray is assembled piece by piece.
 
2 Cable trays and cable trays can be fastened with internal or external connectors, with flat washers and spring washers with nuts.
 
3 Turning parts should be used with vertical elbows and vertical elbows. The installation angle of cable trays should be appropriate.

Scan the QR code to read on your phone

ABOUT US

 

 

Introduction

 

Business

 

Win-win

 

Advantage

 

Contact us

NEWS

 

 

Zhongrui News

 

Industry

 

FAQ

 

Support

 

CONTACT US

Add:92 Weier Road, Chengbei Park, Jingjiang Economic and Technological Development Zone, Jiangsu Province 

Phone

Mobile version