logo

DETAILS

Check category

Definition of bridge and cable tray

  • Categories:Zhongrui News
  • Author:
  • Origin:
  • Time of issue:2019-05-28 14:23
  • Views:

(Summary description)Both the bridge and the cable tray are the brackets for the cable. They are part of the wiring project and are used in modern building construction, which reduces the cost and maximizes the value of utilization. The bridge frame is a general term for a system of continuous rigid structures for supporting cables by straight lines of trays, ladder frames, bends, attachments, and supports and hangers. It is a mounting channel for horizontal and vertical wiring systems. The steel cable tray is a cable laying device that standardizes, serializes, and generalizes the laying of wires, cables, and cables. Here we need to mention the concept of a pallet. Many people mix the bridge with the pallet and think that the functions are basically the same, but it is not. There are great differences between the bridge and the trunking. The main ones are: the bridge is mainly used for laying power cables and control cables, the trunking is used for laying wires and communication cables; the bridge is relatively large (200×100 to 600×200), and the trunking Relatively small; the bridge has a relatively large turning radius, and most of the troughs are bent at right angles; the span of the bridge is relatively large, the trough is relatively small; the fixing and installation methods are different; in some places, the bridge is not covered, and the trough is usually all The closed cable trough is used to route the cable, and the bridge is used to carry the cable. Therefore, everyone should pay attention to the selection of the bridge, so as not to choose the wrong and not achieve their intended purpose.

Definition of bridge and cable tray

(Summary description)Both the bridge and the cable tray are the brackets for the cable. They are part of the wiring project and are used in modern building construction, which reduces the cost and maximizes the value of utilization.

The bridge frame is a general term for a system of continuous rigid structures for supporting cables by straight lines of trays, ladder frames, bends, attachments, and supports and hangers. It is a mounting channel for horizontal and vertical wiring systems. The steel cable tray is a cable laying device that standardizes, serializes, and generalizes the laying of wires, cables, and cables. Here we need to mention the concept of a pallet. Many people mix the bridge with the pallet and think that the functions are basically the same, but it is not. There are great differences between the bridge and the trunking. The main ones are: the bridge is mainly used for laying power cables and control cables, the trunking is used for laying wires and communication cables; the bridge is relatively large (200×100 to 600×200), and the trunking Relatively small; the bridge has a relatively large turning radius, and most of the troughs are bent at right angles; the span of the bridge is relatively large, the trough is relatively small; the fixing and installation methods are different; in some places, the bridge is not covered, and the trough is usually all The closed cable trough is used to route the cable, and the bridge is used to carry the cable. Therefore, everyone should pay attention to the selection of the bridge, so as not to choose the wrong and not achieve their intended purpose.

  • Categories:Zhongrui News
  • Author:
  • Origin:
  • Time of issue:2019-05-28 14:23
  • Views:
Information
Both the bridge and the cable tray are the brackets for the cable. They are part of the wiring project and are used in modern building construction, which reduces the cost and maximizes the value of utilization.
 
The bridge frame is a general term for a system of continuous rigid structures for supporting cables by straight lines of trays, ladder frames, bends, attachments, and supports and hangers. It is a mounting channel for horizontal and vertical wiring systems. The steel cable tray is a cable laying device that standardizes, serializes, and generalizes the laying of wires, cables, and cables. Here we need to mention the concept of a pallet. Many people mix the bridge with the pallet and think that the functions are basically the same, but it is not. There are great differences between the bridge and the trunking. The main ones are: the bridge is mainly used for laying power cables and control cables, the trunking is used for laying wires and communication cables; the bridge is relatively large (200×100 to 600×200), and the trunking Relatively small; the bridge has a relatively large turning radius, and most of the troughs are bent at right angles; the span of the bridge is relatively large, the trough is relatively small; the fixing and installation methods are different; in some places, the bridge is not covered, and the trough is usually all The closed cable trough is used to route the cable, and the bridge is used to carry the cable. Therefore, everyone should pay attention to the selection of the bridge, so as not to choose the wrong and not achieve their intended purpose.

Scan the QR code to read on your phone

ABOUT US

 

 

Introduction

 

Business

 

Win-win

 

Advantage

 

Contact us

NEWS

 

 

Zhongrui News

 

Industry

 

FAQ

 

Support

 

CONTACT US

Add:92 Weier Road, Chengbei Park, Jingjiang Economic and Technological Development Zone, Jiangsu Province 

Phone

Mobile version