logo

DETAILS

Check category

The intensive busbar busbars are required to be corrected for the straightness of the busbar after tinning

  • Categories:Zhongrui News
  • Author:
  • Origin:
  • Time of issue:2019-05-28 14:04
  • Views:

(Summary description)Insulation treatment of conductors: a, the school row: After the tin bar is tinned, the straightness of the busbar is required to be corrected. Only the wolf head or the rubber hammer can be used for the correction. It is strictly forbidden to use the hard metal tool such as the iron hammer to correct it. If the fixture is needed, it must be outsourced on the busbar. a layer of cotton cloth;

The intensive busbar busbars are required to be corrected for the straightness of the busbar after tinning

(Summary description)Insulation treatment of conductors:

a, the school row:

After the tin bar is tinned, the straightness of the busbar is required to be corrected. Only the wolf head or the rubber hammer can be used for the correction. It is strictly forbidden to use the hard metal tool such as the iron hammer to correct it. If the fixture is needed, it must be outsourced on the busbar. a layer of cotton cloth;

  • Categories:Zhongrui News
  • Author:
  • Origin:
  • Time of issue:2019-05-28 14:04
  • Views:
Information
Insulation treatment of conductors:
 
a, the school row:
 
After the tin bar is tinned, the straightness of the busbar is required to be corrected. Only the wolf head or the rubber hammer can be used for the correction. It is strictly forbidden to use the hard metal tool such as the iron hammer to correct it. If the fixture is needed, it must be outsourced on the busbar. a layer of cotton cloth;
 
b, sand row
 
After the correction treatment, the conductor must be carefully sanded to smooth all the edges, corners and faces of the conductor. Any protrusions and burr impurities are strictly prohibited on the conductor. If the weld protrusion or raw material is found to be flawed, it must be Return to the previous process, and wait until all hidden dangers are eliminated before entering the next process. After the sand platoon is finished, use gauze to wipe off all dust and impurities on the conductor and use it after use. Pay attention to dust prevention. This process is very important;
 
c, bandage insulation
 
After the impurity treatment on the surface of the conductor is completed, the process of wrapping the insulation can be entered. The order of the insulation is to first wrap the end bend, the bend of the socket, the bend of the bend or the weld, and then wrap the straight row. The sizing film must be wrapped on the outside of the oriented film. The head is divided into 30-50mm (must ensure that the number of oriented film wrapping layers in the lap surface of 30-50mm meets the standard requirements). When the oriented film is wrapped, the oriented film can be not narrowed. Try not to cut, to ensure the insulation effect, save materials, dressing the orientation film should be strictly wrapped according to the standard number of layers, can not be more or less, more will affect the assembly accuracy, less affect the insulation level, especially at the corner of the bend Pay attention to the uniformity of the number of layers to be wrapped. When dressing the insulation, it must be uniform and dense. There should be no lifting or breakage. When fixing it with adhesive tape, it should be pasted in the direction of the wrapping because of the dense bus. The moisture-proof function is very poor. Therefore, after the entire conductor is wrapped with the insulation layer, the insulation part cannot have direct contact between the conductor and the air at any place. After the end of the wrapping operation, the conductor end and the socket are as required. The insulation layer shall be cut off, the cutting surface shall be flat and beautiful, and after the completion of the banding and cutting process, the dense busbar slot mother shall be discharged at a designated position. The storage area shall be protected from sharp objects and the insulation layer shall be scratched, and must be light in the process of transportation assembly. Take it lightly to avoid damaging the insulation.

Scan the QR code to read on your phone

ABOUT US

 

 

Introduction

 

Business

 

Win-win

 

Advantage

 

Contact us

NEWS

 

 

Zhongrui News

 

Industry

 

FAQ

 

Support

 

CONTACT US

Add:92 Weier Road, Chengbei Park, Jingjiang Economic and Technological Development Zone, Jiangsu Province 

Phone

Mobile version