logo

DETAILS

Check category

Structural Analysis of Aluminum Insulated Busway

  • Categories:Zhongrui News
  • Author:
  • Origin:
  • Time of issue:2019-05-29 17:45
  • Views:

(Summary description)The aluminum alloy air-insulated busway is an indoor low-voltage busway, from the starting end, straight section, vertical right angle elbow, horizontal right angle elbow, Z-shaped elbow, T-shaped, cross-shaped, telescopic joint, varactor and terminal bus The trough is composed of flexible and convenient lines, compact structure and small space occupation. Because the busbar is closedly assembled, it is safe to use and does not require special maintenance. In the straight section (trunk) busway, power can be supplied to the user via the plug-in box, and the large flow branch can be diverted to the distribution box (or cabinet) via the T-shaped busway. The busway is made up of copper or aluminum and aluminum alloy casings, phase-to-phase insulation and other connectors, which are easy to install. When the busbars are connected, they are fastened by the insulated through-bolt. The starting busway and the external equipment form a passage through the soft connection.

Structural Analysis of Aluminum Insulated Busway

(Summary description)The aluminum alloy air-insulated busway is an indoor low-voltage busway, from the starting end, straight section, vertical right angle elbow, horizontal right angle elbow, Z-shaped elbow, T-shaped, cross-shaped, telescopic joint, varactor and terminal bus The trough is composed of flexible and convenient lines, compact structure and small space occupation. Because the busbar is closedly assembled, it is safe to use and does not require special maintenance. In the straight section (trunk) busway, power can be supplied to the user via the plug-in box, and the large flow branch can be diverted to the distribution box (or cabinet) via the T-shaped busway. The busway is made up of copper or aluminum and aluminum alloy casings, phase-to-phase insulation and other connectors, which are easy to install. When the busbars are connected, they are fastened by the insulated through-bolt. The starting busway and the external equipment form a passage through the soft connection.

  • Categories:Zhongrui News
  • Author:
  • Origin:
  • Time of issue:2019-05-29 17:45
  • Views:
Information
The aluminum alloy air-insulated busway is an indoor low-voltage busway, from the starting end, straight section, vertical right angle elbow, horizontal right angle elbow, Z-shaped elbow, T-shaped, cross-shaped, telescopic joint, varactor and terminal bus The trough is composed of flexible and convenient lines, compact structure and small space occupation. Because the busbar is closedly assembled, it is safe to use and does not require special maintenance. In the straight section (trunk) busway, power can be supplied to the user via the plug-in box, and the large flow branch can be diverted to the distribution box (or cabinet) via the T-shaped busway. The busway is made up of copper or aluminum and aluminum alloy casings, phase-to-phase insulation and other connectors, which are easy to install. When the busbars are connected, they are fastened by the insulated through-bolt. The starting busway and the external equipment form a passage through the soft connection. The terminal busway is closed by the terminal box. After the busbars are connected, the joint cover is closed. The gap of the aluminum alloy casing can be sealed with glass glue, and its protection level is greater than IP30. The copper bars at the junctions between the busbars are hot-dip tinned (for silver plating in special applications) to reduce the contact resistance between the busbars or to reduce the oxidation of the copper. The busway is made of air due to the insulating medium, and its heat dissipation effect is superior to that of the dense busway, and its overload capacity is large. The busway housing is made of high-quality high-strength aluminum alloy profile, which has a beautiful appearance and reduces the weight of the busway. At the same time, the outer shell of the busbar is made of aluminum alloy, and the outer casing can be used as a good grounding body and is resistant to nature. The environment is eroded, and thus the busway has obtained a number of national patents. The busway is an all-weather low-voltage and high-current rigid conductor, the bending strength meets the requirements of national standards, and the electrical performance inspection and basis for its manufacture.
 
There are several options for the size of the busbar cross section:
 
(1) Select according to continuous working current;
 
(2) selected according to economic current density;
 
(3) According to the thermal stability check when short circuited;
 
(4) Check the mechanical strength according to the short circuit.

Scan the QR code to read on your phone

ABOUT US

 

 

Introduction

 

Business

 

Win-win

 

Advantage

 

Contact us

NEWS

 

 

Zhongrui News

 

Industry

 

FAQ

 

Support

 

CONTACT US

Add:92 Weier Road, Chengbei Park, Jingjiang Economic and Technological Development Zone, Jiangsu Province 

Phone

Mobile version