logo

DETAILS

Check category

Steps for installation and use of closed busbars and precautions

  • Categories:Zhongrui News
  • Author:
  • Origin:
  • Time of issue:2019-05-28 15:30
  • Views:

(Summary description)Closed busbars are now used more and more. For closed busbars, some steps are required to be used for installation, so the following steps are required for installation. The first one, before the installation, first monitor its quality. When it is inspected, its outer casing does not need to be intact, nor can it be damaged, and the relevant power distribution equipment must be matched before it can be used. Also check the number of them. At the time of inspection, it should also be noted that its busbars cannot be damaged. This will seriously cause the busbars to malfunction frequently in the future. At the time of installation, the relevant moisture-proof functions should also be prepared.

Steps for installation and use of closed busbars and precautions

(Summary description)Closed busbars are now used more and more. For closed busbars, some steps are required to be used for installation, so the following steps are required for installation.

The first one, before the installation, first monitor its quality. When it is inspected, its outer casing does not need to be intact, nor can it be damaged, and the relevant power distribution equipment must be matched before it can be used. Also check the number of them. At the time of inspection, it should also be noted that its busbars cannot be damaged. This will seriously cause the busbars to malfunction frequently in the future. At the time of installation, the relevant moisture-proof functions should also be prepared.

  • Categories:Zhongrui News
  • Author:
  • Origin:
  • Time of issue:2019-05-28 15:30
  • Views:
Information
Closed busbars are now used more and more. For closed busbars, some steps are required to be used for installation, so the following steps are required for installation.
 
The first one, before the installation, first monitor its quality. When it is inspected, its outer casing does not need to be intact, nor can it be damaged, and the relevant power distribution equipment must be matched before it can be used. Also check the number of them. At the time of inspection, it should also be noted that its busbars cannot be damaged. This will seriously cause the busbars to malfunction frequently in the future. At the time of installation, the relevant moisture-proof functions should also be prepared.
 
Secondly, after checking the busbar, it is necessary to configure the busbar, and to arrange the relevant direction of the busbar. It is also necessary to note that the bracket of the closed busbar also needs to be prepared, and the specific preparation is made according to the weight of the busbar.
 
Thirdly, when installing the enclosed busbar, care should be taken to install and use it without damaging the busbar. It needs to be wrapped in the joint of the joint to avoid contamination of related debris and dust. In order to prevent unnecessary failures, the insulation performance is lowered, and when the measurement is performed, it is necessary to promptly reflect the related problems.

Scan the QR code to read on your phone

ABOUT US

 

 

Introduction

 

Business

 

Win-win

 

Advantage

 

Contact us

NEWS

 

 

Zhongrui News

 

Industry

 

FAQ

 

Support

 

CONTACT US

Add:92 Weier Road, Chengbei Park, Jingjiang Economic and Technological Development Zone, Jiangsu Province 

Phone

Mobile version